Slip-on neck flange
China slip On neck flange Manufacturer Datang Provides Slip-On Flange, SO Flange in forged Carbon Steel, Alloy Steel, Stainless Steel for pipe systems.
- Min.Order Quantity: 1 Piece
- Supply Ability: 2000 Tons / Month
- Port: Tianjin port
- Delivery Detail: 15-20 days
Slip on neck flanges are typically provided with a raised or flat face. When a raised face is necessary for slip on pipe flanges, the standard height is 1/16 inch for slip on pipe flanges fewer than 400#. For slip on pipe flanges of 400# and up, the standard slip on pipe flange raised face height is 1/4 inch.
The slip-on flange is positioned so the inserted end of the pipe or fitting is set short of the flange face by the thickness of the pipe wall plus 1/8 of an inch, which thus allows for a fillet weld inside the SO flange equal without doing any damage to the flange face. The back or outside of the slip-on flange or SO flange is also welded with a fillet weld.
Slip on neck flange description
| Type | flange |
| Material | Alloy steel (ASTM A234 WP12/WP11/WP22/WP5/WP9/WP91)< /br> Stainless steel (ASTM A403 WP304/WP304L/WP316/WP316L)< /br> Carbon steel (ASTM A234WPS, A234WPC, A420 WPL6), St45.8 A105 A106 STG42) |
| Standard | ANSI, B16.9, ASME, DIN2650, 2615, 2616, 2617, JIS B2311, 2312, 2313, EN 10253-11, EN10253-2 |
| Type | LR 30, 45, 60, 90, 180 degree< /br> SR 30, 45, 60, 90, 180 degree< /br> 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D |
| Thickness | SCH5 , SCH10, SCH20, SCH30, SCH STD ,SCH40, SCH60, SCH XS ,SCH80, SCH100, SCH120, SCH140, SCH160, XXS |
| Size | 1/2-80 inch (DN15-DN2000) |
| Surface treatment | Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc, |
| Hot dipped Galvanized. | |
| Inspection | Factory in-house self check or Third Party inspection |
| Packing | Wooden case, pallet or as customers’ requirement |
| Applications | Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc |
| Heat Treatment | Normalizing, Annealing, Quenching+Tempering |
| Payment | L/C T/T |
